Cone crusher

Cone crusher is one of the types of sand making machines which is also known as cone sand maker. Hydrocon machine is used as a primary and secondary sand maker and it has the ability to crush heavy stones such as iron ore into smaller pieces.

Hydrocon stone crusher consists of different parts, the most important tasks of this device are placed on the shoulders of the conveyor, transmission and oil pump. The output sand capacity of Hydrocon is higher than other sand makers, and for this reason, it is considered an ideal option for use in the secondary stage of any production line.

Hydrocon crusher is a type of cone crusher that can be used in mines as a primary or secondary crusher. Strong structure, stone crushing power and high power, easy adjustment and low maintenance cost are the exclusive features of this device. All the main parts of the device that are directly under load are made of manganese molybdenum steel, which are highly resistant to wear. In order to maintain the life of the parts and the performance of the device, the automatic lubrication system is used to create a constant flow of lubricating oil and deliver lubricating oil to thrust bearings, bronze bushings, gear and shaft.

  The important advantages of this device compared to other types of stone crushers:

• Automatic output control system to adjust the dimensions of the final product
• Automatic output control system to adjust the dimensions of the final product
• Low maintenance cost
• Simple and easy operation, convenient even for inexperienced operators

 

 

 

Cone crushing equipment is complex. Crushers have many parts. So that the probability of device failure increases. Ata Holding Industrial Group offers high quality crusher parts for Sandvik, Hydrocon, which will reduce your downtime and increase the overall performance of your complex and critical equipment. Our cone crusher spare parts for Sandvik, Hydrocon crushers are of higher quality to ensure durability and better performance so your machines work better and longer.

 

Capacity and output load of hydrocon

Cone crushing equipment is complex. Crushers have many parts. So that the probability of device failure increases. Ata Holding Industrial Group offers high quality crusher parts for Sandvik, Hydrocon, which will reduce your downtime and increase the overall performance of your complex and critical equipment. Our cone crusher spare parts for Sandvik, Hydrocon crushers are of higher quality to ensure durability and better performance so your machines work better and longer.

By changing the size of Kankio, Mantel and Topshell, you can have several hydrocon crushers, which depending on the size of these parts, this device is used as a micro crusher, medium crusher and coarse crusher. The weight of the hydrocon is not too high and it does not cause any problems for its installation and transportation. Due to the existence of three different lubrication systems, machine failure will be greatly reduced and your final costs will be saved.

 

Hydrocon crusher features

• Hydrocon is used as a primary and secondary crusher.
• Due to the special oil system, they can be used in hot and dry places.
• It will be easier to transport due to its low weight.
• The maintenance cost of Hidoken is low due to the special internal system.
• It will be easier to transport due to its low weight.
• The body is made of manganese steel and therefore shows great resistance.
• The inlet opening is adjusted by the hydroset system.

 

Hydrocon crusher product order

For product advice and ordering, please contact the sales and commercial department…

• Contact us:
• 04433744936
• 04433744472
• fsind@ataholding.com
• ارومیه، شهرک صنعتی فاز ۲، خیابان صنعتگران ۱

 

 

گالری نمونه کار سنگ شکن هیدروکن